White Paper

Send documentation comments to [e-mail]
2-7
Cisco Fabric Manager Server Federation Deployment Guide
OL-21765-01, Cisco MDS NX-OS Release 5.x
Chapter 2 Deploying Cisco Fabric Manager Server Federation
Installing the Federated Servers
Step 16 Check the FC Alias and SNMPv3 check boxes as desired and click Install if you are installing Fabric
Manager Standalone.
You see the Configuration Options dialog box for Fabric Manager Server shown in Figure 2-7.
Figure 2-7 Configuration Options Dialog Box for Fabric Manager Server
Step 17
Select the local interface and web server port or Fabric Manager server port. You can change the Fabric
Manager Server port number to a port that is not used by any other application. If you check the Use
HTTPS Web Server check box, the Web Server Port field is grayed out and the default port is 443.
Step 18 Check the FC Alias and SNMPv3 check boxes as desired.
Step 19 Click Install if you are installing Fabric Manager Server. You see the installation progress in the Cisco
Fabric Manager Installer window as shown in Figure 2-8.
Note You should verify that the Fabric Manager Server hostname entry exists on the DNS server,
unless the Fabric Manager Server is configured to bind to a specific interface during installation.
Note If you select a specific IP address during installation and change the server host IP address, you
must modify the following two files that are all located in the $INSTALL/conf directory. Change
server.bindaddrs to the new IP address in the server.properties file and change
wrapper.app.parameter.4 to the new IP address in the FMServer.conf file.