Manual

<taa:rule origin=".*" destination=".*">
<!-- All other calls allowed -->
<proxy/>
</taa:rule>
</taa:rule-switch>
</taa:routed>
</cpl>
Loading the CPL onto Expressway-C
To configure the Expressway-C to use the CPL:
1. Go to Configuration > Call Policy > Configuration.
2. Click Browse... and select your CPL file (created above) from your file system.
3. Click Upload file.
l You should receive a "File upload successful" message.
l If you receive an "XML invalid" message then you must correct the problems with the CPL file and
upload it again.
4. Select a Call policy mode of Local CPL.
5. Click Save.
Cisco Expressway Basic Configuration Deployment Guide (X8.5.2) Page 35 of 57
Optional configuration tasks