Technical References

Cisco AsyncOS 9.1 for Email CLI Reference Guide

Chapter 3 The Commands: Reference Examples

Cluster Management

• clusterconfig deletegroup <groupname> [new_groupname] — Remove a cluster group.

<groupname> - Name of the cluster group to remove.

<new_groupname> - The cluster group to put machines of the old group into.

• clusterconfig setgroup <machinename> <groupname> — Sets (or changes) which group a

machine is a member of.

<machinename> - The name of the machine to set.

<groupname> - The group to set the machine to.

• clusterconfig removemachine <machinename> — Remove a machine from the cluster.

• clusterconfig setname <name> — Changes the name of the cluster to the given name.

• clusterconfig list — Display all the machines currently in the cluster.

• clusterconfig connstatus — Display all the machines currently in the cluster and add routing

details for disconnected machines.

• clusterconfig disconnect <machinename> — This will temporarily detach a machine from the

cluster.

<machinename> - The name of the machine to disconnect.

• clusterconfig reconnect <machinename> - This will restore connections with machines that

were detached with the “disconnect” command.

• clusterconfig prepjoin new <serial_number> <hostname> <user_key> — This will add a new

host that is to join the cluster over the CCSport.

<serial_number> - The serial number of the machine being added.

<hostname> - The host name of the machine being added.

<user_key> - The SSH user key from the "prepjoin print" command from

the joining machine.

• clusterconfig prepjoin delete <serial_number|hostname> — This will remove a host that was

previously indicated to be added from the "prepjoin new" command. This is only necessary to be

used if you later decide not to add the host. When a host is successfully added to the cluster, its

prepjoin information is automatically removed.

Usage

Commit: This command does not require a ‘commit’.

Cluster Management: This command is restricted to cluster mode.

Batch Command: This command does not support a batch format.

Example

For an explanation of the clusterconfig command and its uses, please see Cisco AsyncOS for Email

User Guide.