Technical References

235
Cisco AsyncOS 9.1 for Email CLI Reference Guide
Chapter 3 The Commands: Reference Examples
Reporting
Reporting
This section contains the following CLI commands:
• reportingconfig
reportingconfig
Using the reportingconfig command
The following subcommands are available within the reportingconfig submenu:
Usage
Commit: This command requires a ‘commit’.
Example: Enabling Reporting Filters (M-Series only)
mail3.example.com> reportingconfig
Choose the operation you want to perform:
- FILTERS - Configure filtering for the SMA.
- ALERT_TIMEOUT - Configure when you will be alerted due to failing to get reporting data
- DOMAIN - Configure domain report settings.
- MODE - Enable/disable centralized reporting.
[]> filters
Filters remove specific sets of centralized reporting data from the "last year" reports.
Data from the reporting groups selected below will not be recorded.
All filtering has been disabled.
1. No Filtering enabled
2. IP Connection Level Detail.
3. User Detail.
4. Mail Traffic Detail.
Ta b l e 3 - 1 4 reportingconfig Subcommands
Syntax Description Availability
filters Configure filters for the Security
Management appliance.
M-Series only
alert_timeout Configure when you will be alerted due
to failing to get reporting data.
M-Series only
domain Configure domain report settings. M-Series only
mode Enable centralized reporting on the
Security Management appliance.
Enable centralized or local reporting for
the Email Security appliance.
C-, M-Series
mailsetup Configure reporting for the Email
Security applaince.
C-Series only