Technical References

3-173

CLI Reference Guide for AsyncOS 9.7 for Cisco Email Security Appliances

Chapter 3 The Commands: Reference Examples

Networking Configuration / Network Tools

--- anotherhost.example.com ping statistics ---

11 packets transmitted, 11 packets received, 0% packet loss

round-trip min/avg/max/stddev = 0.115/0.242/1.421/0.373 ms

Note You must use Control-C to end the ping command.

ping6

Description

Ping a network host using IPv6

Usage

Commit: This command does not require a ‘commit’.

Cluster Management: This command is restricted to machine mode. It is further restricted to the login

host (i.e., the specific machine you are logged onto). This command requires access to the local file

system.

Batch Command: This command does not support a batch format.

Example

mail.example.com> ping6

Which interface do you want to send the pings from?

1. Auto

2. Management (192.168.42.42/24: mail3.example.com)

[1]> 1

Please enter the host you wish to ping.

[]> anotherhost.example.com

Press Ctrl-C to stop.

Note You must use Control-C to end the ping6 command.

routeconfig

Description

The routeconfig command allows you to create, edit, and delete static routes for TCP/IP traffic. By

default, traffic is routed through the default gateway set with the

setgateway command. However,

AsyncOS allows specific routing based on destination.