Technical References

3-166

CLI Reference Guide for AsyncOS 9.7 for Cisco Email Security Appliances

Chapter 3 The Commands: Reference Examples

Networking Configuration / Network Tools

Please enter a non-default (1500) MTU value for the Data 2 interface.

[]> 1200

Ethernet interfaces:

1. Data 1 default mtu 1500

2. Data 2 mtu 1200

3. Management default mtu 1500

4. VLAN 12 default mtu 1500

Choose the operation you want to perform:

- EDIT - Edit an ethernet interface.

[]>

interfaceconfig

Description

Configure the interface. You can create, edit, or delete interfaces. You can enable FTP, change an IP

address, and configure Ethernet IP addresses.

Usage

Commit: This command requires a ‘commit’.

Cluster Management: This command is restricted to machine mode.

Batch Command: This command supports a batch format.

Batch Format

The batch format of the interfaceconfig command can be used to perform all the fuctions of the

traditional CLI command.

• Creating a new interface

interfaceconfig new <name>

--ip=IPv4 Address/Netmask

--ip6=IPv6 Address/Prefix Lenght

[--ftp[=<port>]]

[--telnet[=<port>]]

[--ssh[=<port>]]

[--http][=<port>]

[--https[=<port>]]