Technical References

3-76
CLI Reference Guide for AsyncOS 9.7 for Cisco Email Security Appliances
Chapter 3 The Commands: Reference Examples
General Management/Administration/Troubleshooting
• Check the RAID status
• Show the contents of the ARP cache
• Show the contents of the NDP cache
• Clear the LDAP, DNS, ARP and NDP caches
• Reset and delete the reporting database
• Enable reporting daemons
• Disable reporting daemons
• Reset and delete the tracking database
• Reset configuration to the initial manufacturer values
Example: Displaying and Clearing Caches
The following example shows the diagnostic command used to display the contents of the ARP cache
and to flush all network related caches.
mail.example.com> diagnostic
Choose the operation you want to perform:
- RAID - Disk Verify Utility.
- DISK_USAGE - Check Disk Usage.
- NETWORK - Network Utilities.
- REPORTING - Reporting Utilities.
diagnostic raid
diagnostic network arpshow
diagnostic network ndpshow
diagnostic network flush
diagnostic reporting deletedb
diagnostic reporting enable
diagnostic reporting disable
diagnostic tracking deletedb
diagnostic reload