Technical References

3-75
CLI Reference Guide for AsyncOS 9.7 for Cisco Email Security Appliances
Chapter 3 The Commands: Reference Examples
General Management/Administration/Troubleshooting
• Troubleshoot hardware and network issues using various utilities
• Check the RAID status
• Display ARP cache
• Clear LDAP, DNS, and ARP caches
• Send SMTP test messages
Using the diagnostic Command
The following commands are available within the diagnostic submenu:
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command is restricted to machine mode. It is further restricted to the login
host (i.e., the specific machine you are logged onto). This command requires access to the local file
system.
Batch Command: This command supports a batch format.
Batch Format
The batch format of the diagnostic command can be used to check RAID status, clear caches and show
the contents of the ARP cache. To invoke as a batch command, use the following formats:
Use the batch format to perform the following operations:
Ta b l e 3 - 6 diagnostic Subcommands
Option Sub Commands Availability
RAID 1. Run disk verify Available on C30 and C60 only.
2. Monitor tasks in progress
3. Display disk verify verdict
DISK_USAGE
(deprecated)
No Sub Commands This command has been deprecated. Instead,
use the
diskquotaconfig command.
NETWORK FLUSH C-, X-, and M-Series
ARPSHOW
SMTPPING
TCPDUMP
REPORTING
DELETEDB C-, X-, and M-Series
DISABLE
TRACKING
DELETEDB C-, X-, and M-Series
DEBUG
RELOAD
No Sub Commands C-, X-, and M-Series