Installation Guide

Chapter 4 Front Panel Operation
66 OL-31086-01
Menu Item
Description
Parameters
Verify Timer
Indicates the time, in seconds, the unit must wait
for the PAT table to verify the signal has a valid
transport.
10 to 255
Backup Channel Status
Menu Item
Description
Parameters
PE
Displays the program entry.
PE1 to PE16
Backup Channel
Displays the channel number assigned to the
selected backup transport.
–
Transport #
Displays the backup transport number for the
program entry selected.
1, 2, or 3
Backup Transport Status
Menu Item
Description
Parameters
Backup
Indicates the configured backup transport entry
number.
1, 2, or 3
Input, NetId, Freq
(GHz), SymRate,
FEC, OrbPos, E/W,
Pol, Modulation,
Rolloff, Config by
For information on the tuning parameters, see
Status Menu: TS Input (on page 57).
Note: The RF input must be configured to match
the bandwidth of the backup parameters.
–