Installation Guide

About the Front Panel
OL-31086-01 43
Front Panel LEDs
The functions of the LEDs are described in the table below.
LED
Signal
State/Color
Explanation
ALARM
Red
Solid for five seconds indicates a Warning.
Red
Flashing indicates an Alarm.
SIGNAL
Green
Solid indicates all of the following conditions:

active RF inputs are enabled, locked to a
signal, and are not muted.

all outputs are operating without an error.
Green
Flashing indicates one of the following
conditions:

difficulty with an input, route, or output.

one or more of the inputs are not
synchronized.

one or more ASI outputs are routed, but
muted by a fault condition.

no RF signal is present or detected, or it is
muted.

receiver is not authorized to receive the
program.
Off
Off indicates all of the following conditions:

no RF input signal is available, enabled or
detected, or the input is muted.

no ASI input is present.

no valid inputs are available.