Installation Guide

Installing the D9854/D9854-I Receiver
OL-31086-01 27
Connecting AC Power to the D9854/D9854-I Receiver
1 Connect the power cord (supplied with the D9854/D9854-I receiver) between the
rear panel power receptacle and a 100 to 120/200 to 240 V AC power outlet.
2 Make sure that the power cable is connected to protective ground. See
Grounding (on page 26) for more information.
The unit is equipped with one power supply located in the rear of the chassis. Note
the location of the power supply in the event of alarms/warnings resulting in
replacement of a power supply. Alarm messages appear in the Message Log.