Installation Guide

OL-31086-01 345
Warning
Message
Type
Message
Cause/Remedy
Description
ID
Transport Error
Set
Buffer Overflow
Cause: Possible uplink
or signal issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
customer support if the
problem persists.
The transport stream
is faster than the
maximum buffer or
the decode engines are
having difficulty
handling the data sent
to them.
42000
Transport Error
Set
Transport Error
Indicator
Cause: Possible uplink
or signal issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
customer support if the
problem persists.
Transport packets are
marked as "errored"
upstream of the
decoder.
42000
Transport Error
Set
Transport Rate
Error: FPGA
Overflow
Cause: Uplink settings
may have changed since
setting up the unit.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and/or
drop programs not
needed for downstream
devices. Contact your
(uplink) service provider
to verify the expected bit
rate settings.
The output rate is
higher than level set
by the user.
42000
Transport Error
Clear
Continuity Count
Error Cleared
–
Trap expires after 30
seconds.
42000
Transport Error
Clear
Buffer Overflow
Cleared
–
Trap expires after 30
seconds.
42000
Transport Error
Clear
Transport Error
Indicator Cleared
–
Trap expires after 30
seconds.
42000
Transport Error
Clear
Transport Rate
Error: FPGA
Overflow
Cleared
–
Trap expires after 30
seconds.
42000