Installation Guide

Chapter 6 Service and Maintenance
344 OL-31086-01
Warning
Message
Type
Message
Cause/Remedy
Description
ID
MPoIP TS
Overflow
Set
MPEGoIP Output
Overflow
Cause: Uplink settings
may have changed since
setup of the unit.
Variable Bit
Rate/Statmuxed streams
may be in use.
Remedy: Increase output
rate, drop unreferenced
content in DPM Options,
and drop programs not
needed for downstream
devices. Contact the
(uplink) service provider
to verify the expected bit
rate settings.
The output rate is
higher than level set
by the user.
41000
MPoIP TS
Overflow
Clear
MPEGoIP Output
Overflow
Cleared
–
–
41000
SFN MIP
Counter (D9854
with SFN only)
Set
Transport Error
SFN MIP Input
Output
Difference
Cause: Extra packets
may have been inserted,
or packets were deleted
between the input and
output of the receiver.
Remedy: Clear
warnings, reset unit, and
notify Cisco customer
support if the problem
persists.
Input and output
packet counts on MIP
reception are different.
41500
SFN MIP
Counter (D9854
with SFN only)
Clear
Transport Error
SFN MIP Input
Output
Difference
Cleared
–
–
41500
Transport Error
Set
Continuity Count
Error
Cause: Possible uplink
or signal issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
customer support if the
problem persists.
Transport packet
continuity count
jumped. Possible
packet loss.
42000