Installation Guide

OL-31086-01 343
Alarm
Message
Type
Message
Cause/Remedy
Description
Severity
ID
Disaster
Declared
Set
Disaster declared
Cause: One or
more of the
following is
detected: RF lock
loss, unstable RF
signal, and/or
transport loss (RF
locked, but no
transport stream
packet received)
Remedy: A valid
signal.
A disaster is
detected.
Major
98000
Disaster
Declared
Reset
No disaster
–
Disaster
recovery
feature is
cleared with a
valid signal.
Major
98000
Warnings
Warning
Message
Type
Message
Cause/Remedy
Description
ID
ASI TS
Overflow
Set
ASI Output
Overflow
Cause: Uplink settings
may have changed since
setting up the unit.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and drop
the programs that are
not needed for
downstream devices.
Contact your (uplink)
service provider to
verify the expected bit
rate settings.
The output rate is
higher than level set
by the user.
40000
ASI TS
Overflow
Clear
ASI Output
Overflow
Cleared
–
–
40000