Installation Guide

OL-31086-01 341
Alarm
Message
Type
Message
Cause/Remedy
Description
Severity
ID
FEC FPGA
Status
(D9854-I only)
Set
FEC FPGA
initialization failed
Cause: Hardware
issue.
Remedy: Ensure
that the USB Flash
is installed,
formatted, and the
image is loaded.
Also, ensure that
the FEC FPGA is
installed and the
CPLD is properly
programmed.
FEC FPGA is
loaded and
started, but
initial
parameter
setup failed.
Major
92400
FEC FPGA
Status
(D9854-I only)
Clear
FEC FPGA is
running OK
–
FEC FPGA is
loaded, started,
initialized, and
is fully
operational.
Major
92400
PE <n>: CA
System Error
Set
No PowerVU
support
Cause: Selected
program cannot
be descrambled.
Remedy: Check
the Installation
and Configuration
Guide for
PowerVu
descrambling
support. Ensure
that the
appropriate CAM
is inserted and
that the PE CAM
slot is assigned
correctly.
CA System
present in the
currently
selected
channel cannot
be descrambled
due to no
PowerVu ISE
or CAM
support.
Minor
93000-93031
PE <n>: CA
System Error
Set
No Matching
CAM
–
–
Minor
93000-93031
PE <n>: CA
System Error
Clear
Fault cleared
–
–
Minor
93000-93031