Installation Guide

Chapter 6 Service and Maintenance
334 OL-31086-01
Alarm
Message
Type
Message
Cause/Remedy
Description
Severity
ID
MPoIP Status
Set
MPEGoIP
Overflow. Output
Muted. Reduce
content.
Cause: Uplink
settings may have
changed since
setup of the unit.
Variable Bit
Rate/Statmuxed
streams may be in
use.
Remedy: Increase
output rate, drop
unreferenced
content in DPM
Options, drop
programs not
needed for
downstream
devices. Contact
the (uplink)
service provider to
verify expected bit
rate settings.
Current
transport rate
exceeds
configured rate
for MPEG over
IP output.
Output has
been muted to
protect
downstream
devices.
Minor
35000
MPoIP Status
Clear
MPEGoIP Output
Restored
–
–
Minor
35000
Boot Host
Set
KB not accessible
Cause: Hardware
issue
Remedy: Clear
alarms, reset unit,
and notify Cisco
customer support
if the problem
persists.
KB is not
detected by
Boot code.
Major
36000
Boot Host
Set
LCD not
connected
Cause: Hardware
issue
Remedy: Clear
alarms, reset unit,
and notify Cisco
customer support
if the problem
persists.
LCD is not
detected by
Boot code.
Major
36000