Installation Guide

Chapter 5 Web GUI Setup and Monitoring
284 OL-31086-01
Setting up Import/Export FTP Information
1 From the user interface of the D9854/D9854-I, choose System Settings >
Import/Export FTP. The Import/Export FTP page is displayed.
2 The Configure Offline FTP Settings File Transfer area has backup and restore
controls.
Note: You must have access to an FTP Server (e.g. WinFTP) on a network or a
local PC before you can setup backup/restore controls.
3 In the Settings Filename field, enter the file name of the backup/restore file. You
can enter up to 119 characters.
4 In the FTP Server IP Address field, enter the IP address of the FTP server used to
restore the backup/restore file. The address is up to 12 characters in length (e.g.
171.300.100.200 and in the range from 0 to 255.
5 In the FTP User Name and FTP Password fields, enter the user name and
password to access the FTP server.
Note: The FTP Password is not retained in the transcoder. You must re-enter the
password before initiating the backup or restore operation.