Installation Guide

Configuring Transport Stream Information
OL-31086-01 251
7 From the PSI Table Output Option drop-down list, choose the output option
that allows the operator to specify which PSI tables to include in the
program/output stream. The following table describes each option:
PSI Options
Description
Pass All
Transmits the incoming PSI Tables as is; does not modify the
content and rate.
Drop All
Does not transmit any PSI Tables.
Ctl By Table
The operator can click Table Options to select the output mode for
each table. The default table selections will be all pass, and only
with CDT dropped.
8 From the PSI Regeneration Option drop-down list, choose whether to
regenerate the PSI tables. You can select Always or As Needed (only if the
content has changed).
9 If Ctl By Table is selected as the PSI Table Output Option, click Table Options
to configure the DPM table options. The DPM Table Options (MOIP) window is
displayed.
10 Choose the tables which will be passed, dropped, regenerated or passed with
rate control (PwRC) from the MPEGoIP Output. For more information on the
table options, see PSI Table Settings (on page 129).