Installation Guide

D9854/D9854-I Advanced Program Receiver
OL-31086-01 3
 MPEG and Dolby Digital audio decoding
 DVB or Imitext subtitling
 Four audio outputs providing either two stereo pairs or four mono channels of
balanced, audio, each with the ability to use part of their output for applications
such as SAP, cue tones, etc.
 Utility data up to 38.4 kbps via RS-232
 Uplink addressable decoder output control (VBI, audio routing, DPI, and ASI
output)
 Fingerprint trigger
 Field upgradeable software and security
 Simple Network Management Protocol (SNMP) for setup, control, and
monitoring
 Front panel LCD for control and monitoring each with the ability to use part of
their output for applications such as SAP, cue tones, etc.
 DVB-VBI and SCTE-127 support
 DTMF cue tone and cue trigger outputs for ad-insertion
 Digital Program Mapping providing uplink control for service replacements in
blackout areas
 Field upgradeable software and security
 Front panel LCD and keypad for monitoring and control
 DVB-VBI and SCTE-127 support
 CAM Interface software
 Dual-Tone Multifrequent (DTMF) cue tone and cue trigger outputs for ad
insertion
 Digital Program Mapping providing uplink control for service replacements in
blackout areas
 Multiprotocol Encapsulation (MPE) output
 HD to SD down conversion in uncompressed domain
 Live Event Control Support
 MPEGoIP output (Optional for the D9854)
 User-switchable redundant ASI outputs or SDI or HD-SDI outputs
 SD or HD-SDI video output with embedded audio