Installation Guide

Configuring Transport Stream Information
OL-31086-01 235
The following MPEG over IP Output parameters are displayed for the D9854-I only:
In addition to the MPEG over IP Output parameters, you can configured the FEC
Scheme.
From the FEC Scheme drop-down list, choose the FEC packet sending arrangement
(Block Aligned or Non-Block Aligned) and click Apply. They are defined in the pro-
MPEG FEC and SMPTE-2022 standards.
Note: If the FEC Mode in the FEC Settings is set to None, the FEC Scheme is
ignored. For more information on FEC Mode, see Configuring Forward Error
Correction Settings (on page 242).