Installation Guide

Chapter 5 Web GUI Setup and Monitoring
230 OL-31086-01
Viewing the ASI Output Transport Status
From the user interface of the D9854/D9854-I, choose Transport Stream > Output
Transport Status under ASI Output. The PID Output Status page is displayed.
The Program Entry - Referenced PIDs table displays the specified PE ES PIDs
information on the output.
The Output Channel and PID Conflicts table displays a list of conflicts when the
DPM alarm is active.
Configuring the MPEGoIP Output
1 From the user interface of the D9854/D9854-I, choose Transport Stream >
MPEG over IP Output.