Installation Guide

Setting up Input Information
OL-31086-01 185
Setting up the Channel Selections
1 From the user interface of the D9854/D9854-I, choose Input > Channel
Selection. The Channel Selection page is displayed.
2 Enter a channel number for up to 16 program entries. Alternatively, choose an
available from a drop-down list.
Note: Only PE1 supports PowerVu descrambling. Do not assign PowerVu
channels to PE2 to PE16. If any PowerVu channels are assigned to PE2 to PE16,
all service PIDs associated with these channels will be dropped from the
transport output.
3 Click Apply.