Installation Guide

Setting up Input Information
OL-31086-01 161
Setting up Input Information
Setting up the RF Input
1 From the user interface of the D9854/D9854-I, choose Input > Input Setup. The
Input Setup page is displayed.
2 In the RF Input Selection area, check the Use RF Input check box to activate an
RF input. You can select RF 1 to RF 4.
3 Choose UserCfg from the Input Selection drop-down list to lock to the RF input
set by the user. Choose SW Map to use the orbital position settings to select the
RF input. We recommend that you validate the orbital position for the SW Map
option.
4 Click the Use RF 1, Use RF 2, Use RF 3, or Use RF 4 radio button to select an RF
input to activate.