Data Sheet

Data Sheet
All contents are Copyright © 1992–2007, 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 6
Table 2. LED Descriptions
Led Name Color Description
Green Power on POWER
Off Power off
Green Equipment 1 laser on
Red Equipment 1 laser off
EQPT1/2 TX
Off Equipment 1 SFP not present
Green Equipment 1 signal detected
Red Equipment 1 loss of signal
Flashing green Equipment 1 loss of lock
EQPT1/2 RX
Off Equipment 1 SFP not present
Green Network 1 laser on
Red Network 1 laser off
NTWK1/2 TX
Off Network 1 SFP not present
Green Network 1 signal detected
Red Network 1 loss of signal
NTWK1/2 RX
Off Network 1 SFP not present
Table 3. Product Specifications
Configuration Parameter Specification
Supply voltage 90–240VAC
Max power consumption 9.7W
Electrical
Connector type IEC 60320 C14 inlet plug
Reliability Mean time between failures (MTBF) 24.68 years
Dimensions
●
6.91 in. (faceplate 8.25 in. ) W
●
1.6 in. H
●
10 in. D
Mechanical
Weight (estimated with 4 SFPs) 4–5 lb
Environmental Temperature 0–40º C
Bit rate 100–2500 Mbps Performance
Regeneration
●
3R upstream (from client to trunk SFP)
●
2R downstream (from trunk to client)
Table 4. CWDM SFP Optical Specification (OC-3/STM-4, OC-48/STM-16, 1G Ethernet, 1G Fiber Channel
and 2G Fiber Channel)
Parameter Symbol Minimum Maximum Units Notes and Conditions
Transmitter Center Wavelength λ (λ – 4) (λ + 7) nm Available center wavelengths are
1470, 1490, 1510, 1530, 1550,
1570, 1590, and 1610 nm
Side-Mode Suppression Ratio SMSR 30 dB
Transmitter Optical Output Power Pout 0 5.0 dBm Average power coupled into
single-mode fiber
Receiver Optical Input Power
(BER < 10–12 with PRBS 2–7—1)
Pin –29.0 –7.0 dBm Data rate below 2000 Mbps
Receiver Optical Input Power
(BER < 10–12 with PRBS 2–7—1)
Pin –28.0 –7.0 dBm Data rate above 2000 Mbps
Receiver Optical Input
Wavelength
λ 1450 1620 nm
Transmitter Extinction Ratio OMI 9 dB
Dispersion Penalty at 100 km 2 dB Data rate below 2000 Mbps