Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 97
metric export host
To configure the metric export host, use the metric export host command. To disable metric export,
use the no form of this command.
metric export host ip-address [port]
no metric export
Syntax Description
ip-address
Specifies the IPv4 address of the external reporting
console.
port
Port the external reporting console is listening on
for incoming packets (optional).
Syntax Description
Defaults
The default port is 9995.
Command Modes
Command mode
Usage Guidelines
Use this command to export ART metrics to an external reporting console.
Examples
The following example specifies the reporting console’s IP address as the source to collect ART
metrics, then removes this configuration.
[e-mail]# metric export 10.0.0.1 9995
[e-mail]# no metric export