Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 88
ip interface
To select the external port or the internal ports for the NME-NAM, use the ip interface command.
ip interface external | internal
Note This command is not valid for NAM-1 or NAM-2 devices, the Cisco NAM 2200
Series appliances, or the Cisco NAM Virtual Blades.
Syntax Description
external
Selects the RJ-45 Fast Ethernet connector on the
NME-NAM.
internal
Selects the internal LAN segment to the router through the
PCI interface for IP communication (for example Telnet,
SNMP, HTTP, and so forth) to the NME-NAM.
Syntax Description
Defaults
This command has no default settings.
Command Modes
Command mode
Usage Guidelines
This command is supported only on the NME-NAM.
Examples
This example shows how to specify an interface port for the NME-NAM:
root@localhost# ip interface external
Related Commands
ip
show ip