Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 68
ftp
To set the FTP server and directory for storing scheduled reports, use the ftp command. To disable
FTP scheduled reports, use the no form of this command.
ftp
no ftp
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Usage Guidelines
When you enter the FTP subcommand mode, the following commands are available:
 ? or help—Displays help; see the help command section.
 cancel—Discards changes and exits from the subcommand mode.
 directory WORD—Specifies the FTP location on the FTP server.
 exit—Saves changes and exits from the subcommand mode; see the exit command.
 password WORD—Specifies the user password on the FTP server.
 index—A unique integer identifying the FTP entry
 user WORD—Specifies the user name on the FTP server.
 server WORD—Specifies the FTP server name or IP address.
Examples
This example shows how to set the FTP server for storing scheduled reports:
root@localhost# ftp
Entering into subcommand mode for this command.
Type 'exit' to apply changes and come out of this mode.
Type 'cancel' to discard changes and come out of this mode.
root@localhost(sub-ftp)# ?
? - display help
cancel - discard changes and exit from subcommand mode