Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 25
cdp enable
To enable the Cisco Discovery Protocol (CDP) on the NME-NAM, use the cdp enable command.
To disable CDP on the NME-NAM, use the no form of this command.
cdp enable
no cdp enable
Note This command is not valid for NAM-1 or NAM-2 devices, the Cisco NAM 2200
Series appliances, or NAM Virtual Blades.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Usage Guidelines
This command is supported only on the NME-NAM-80S and NME-NAM-120S.
Examples
This example shows how to enable CDP:
[e-mail]# cdp enable
[e-mail]#
Related Commands
classification-mode default
To use default NAM packet classification, use the classification-mode default command. This
command is added in NAM 6.0(1).
Classification-mode default
Syntax Description
This command has no arguments or keywords.