Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 246
web-publication
To enable and set up a list of hosts that can view the NAM GUI monitoring displays without logging
into the NAM, use the web-publication command. To remove web publishing from your
configuration, use the no form of this command.
web-publication username
no web-publication
Syntax Description
username
Sets the username.
Syntax Description
Defaults
This command has no default settings.
Command Modes
Command mode
Usage Guidelines
When you enter the web user subcommand mode, the following commands are available:
 ? or help—Displays help; see the help command.
 cancel—Discards changes and exits from the subcommand mode.
 exit—Saves changes and exits from the subcommand mode; see the exit command.
 alarm enable | disable—(Optional) Enables or disables web publishing of alarm displays.
 allow-hosts WORD—Sets the hosts which are allowed to view web published monitoring
displays.
 code WORD—Sets the code which allows hosts to view web published monitoring displays.
 report enable | disable—(Optional) Enables or disables web publishing report displays.
 rmon enable | disable—(Optional) Enables or disables web publishing RMON monitoring
displays.
 voice enable | disable—(Optional) Enables or disables web publishing voice monitoring displays.