Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 245
waas server filter
To add a WAAS server filter, use the waas import server-filter command. To remove a server
filter, use the no form of this command
waas server filter <ip-address>
no waas server filter <ip-address>
Syntax Description
ip-address
Specifes IPV4 of the WAAS server
Syntax Description
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
The following example shows how to add a WAAS server filter and how to remove a WAAS server
filter:
[e-mail]# waas server filter 10.0.0.2
Successfully added server filter.
[e-mail]# no waas server filter 10.0.0.2
[e-mail]#