Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 230
snmp
To configure NAM system MIB objects, use the snmp command.
snmp community community-string { ro | rw }
snmp delete community community-string
snmp contact contact-string
snmp location location-string
snmp name name-string
Syntax Description
community
community-string ro | rw
Sets the device community string.
delete community-string
Deletes the device community string.
contact contact-string
Sets the device contact string.
location location-string
Sets the device location.
name name-string
Sets the device name.
Syntax Description
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to configure NAM system MIB objects:
Root@localhost#
Related Commands
show snmp