Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 220
show trap-dest
To display all of the NAM trap destinations, use the show trap-dest command.
show trap-dest [trap-index]
Syntax Description
trap-index
(Optional) Displays the trap destinations by the specified trap
index.
Syntax Description
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to display the NAM trap destinations:
Root@localhost# show trap-dest
Trap index: 23370
Community: public
Address: 172.20.98.136
UDP port: 162 (00a2)
Owner: LocalMgr
Root@localhost#
Related Commands
traceroute6
To trace the route to a IPv6 network device, use the traceroute6 command. This command is added
in NAM 6.0(1).
traceroute [ n | v] [-m max_ttl] [-p port] [-s src_addr] [-w waittime] destination host name | IPv6 address
Syntax Description
-n
(Optional) Prints hop addresses numerically.