Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 214
show snmp
To display the SNMP parameters, use the show snmp command.
show snmp
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to display the SNMP parameters:
Root@localhost# show snmp
SNMP Agent: mynam.cisco.com 209.265.200.225
SNMPv1: Enabled
SNMPv2C: Enabled
SNMPv3: Disabled
community private write
community public read
trap community public 112.10.17.237
trap community public 112.10.17.244
sysDescr Cisco Catalyst 6500 Series Network Analysis Module (WS-SVC-NAM-3-K9) Console, 5.0(1T.45)
Copyright (c) 1999-2011 by Cisco Systems, Inc.
sysObjectID workgroup.1.3.1.1.2.291
sysContact engineer
sysName mynam
sysLocation RMON Lab
Related Commands
snmp