Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 190
show local-storage progress
To show RAID array construction or deconstruction progress for local disks, use the show
local-storage progress command.
show local-storage progress
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to display RAID array construction or deconstruction progress for local disks:
Root@localhost# show local-storage progress
Individual Disk Rebuild
-----------------------
Device(Encl-64 Slot-0) is not in rebuild process
Device(Encl-64 Slot-1) is not in rebuild process
Device(Encl-64 Slot-2) is not in rebuild process
Device(Encl-64 Slot-3) is not in rebuild process
Device(Encl-64 Slot-4) is not in rebuild process
Device(Encl-64 Slot-5) is not in rebuild process
Device(Encl-64 Slot-6) is not in rebuild process
Device(Encl-64 Slot-7) is not in rebuild process
Exit Code: 0x00
Virtual Drive Reconstruction
----------------------------
Reconstruction on VD #0 is not in Progress.
Exit Code: 0x00
Reconstruction on VD #1 is not in Progress.
Exit Code: 0x00
Related Commands
show local-storage all
show local-storage progress
show local-storage virtual