Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 181
show local-storage all
To show all physical disks and virtual drives, use the show local-storage all command.
show local-storage all
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to display all physical disks and virtual drives:
Root@localhost# show local-storage all
==============================================================================
Adapter: 0
Product Name: LSI MegaRAID SAS 9266-8i
Memory: 1024MB
BBU: Present
Serial No:
==============================================================================
Number of DISK GROUPS: 2
DISK GROUP: 0
Number of Spans: 1
SPAN: 0
Span Reference: 0x00
Number of PDs: 2
Number of VDs: 1
Number of dedicated Hotspares: 0
Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name :
RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
Size : 930.390 GB
State : Optimal
Strip Size : 64 KB
Number Of Drives : 2
Span Depth : 1
Default Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Access Policy : Read/Write
Disk Cache Policy : Disk's Default
Encryption Type : None
Physical Disk Information:
Physical Disk: 0
Enclosure Device ID: 64
Slot Number: 0
Enclosure position: 0