Manualshelf

Reference Guide

ManualsBrandsCisco ManualsInterface ModulesCisco Catalyst 6500 Series Firewall Services Module
171172173174175176177178179180
Cisco Prime Network Analysis Module Command Reference Guide Page 178
show ip
To display the NAM IP parameters, use the show ip command.
show ip
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to display the NAM IP parameters:
Root@localhost# show ip
IP address: 101.10.11.189
Subnet mask: 255.255.255.255
IP Broadcast: 111.20.255.255
DNS Name: namlab-kom9.cisco.com
Default Gateway: 111.20.98.125
Nameserver(s): 111.69.2.135
HTTP server: Enabled
HTTP secure server: Disabled
HTTP port: 80
HTTP secure port: 443
TACACS+ configured: No
Telnet: Enabled
SSH: Disabled
Related Commands
ip address
ip broadcast
ip gateway
ip host
ip hosts add
ip hosts delete
ip http secure generate
ip http secure port