Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 175
show internal resources monitoring
To display the resources used for monitor features, use the show internal resources monitoring
command. This command is added in NAM 6.0(2).
show internal resources monitoring
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to display the resources used for monitor features:
[e-mail]# show internal resources monitoring
Regular FM threads : 3
Non-promiscuous FM threads : 1
TCP flows per FM : 1000000
TCP flows for NP : 2500000
TCP flows total : 5500000 (2368 bytes each)
UDP flows per FM : 1000000
UDP flows for NP : 1000000
UDP flows total : 4000000 (1024 bytes each)
SCTP flows per FM : 10000
SCTP flows for NP : 50000
SCTP flows total : 80000 (1024 bytes each)
IP flows per FM : 100000
IP flows for NP : 250000
IP flows total : 550000 (896 bytes each)
L2 flows per FM : 50000
L2 flows for NP : 50000
L2 flows total : 200000 (768 bytes each)
Total flows : 10330000
URL entries per FM : 10000
URL entries for NP : 50000
URL entries total : 80000 (552 bytes each)