Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 174
show interface management-port
To display the configuration and statistics of management interface, use the show interface
management-port command. This command is added in NAM 6.0(1).
show interface management-port
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to display the configuration and statistics of management interface:
[e-mail]# show interface management-port
eth0 Link encap:Ethernet HWaddr 50:3D:E5:9E:33:06
inet addr:172.20.122.196 Bcast:172.20.122.255 Mask:255.255.255.128
inet6 addr: fe80::523d:e5ff:fe9e:3306/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:892882 errors:0 dropped:0 overruns:0 frame:0
TX packets:432497 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:165147017 (157.4 MiB) TX bytes:77233177 (73.6 MiB)
Memory:dfa00000-dfb00000
[e-mail]#