Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 164
show debug messages
To display NAM log file contents, use the show debug messages command.
show debug messages
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default behavior or settings.
Command Modes
Command mode
Examples
The following example shows the log file contents:
[e-mail]# show debug messages
2008-10-14 00:07:11 *** FM Metric Engine 1 created (iThread 3)
2008-10-14 00:07:11 MAIN: Flow reaper starting, LWP = 1381
2008-10-14 00:07:11 Packet data and flow processing layers started successfully.
2008-10-14 00:07:11 WAAS: Load autoconfig: enables:1 client:1 cltwan:0 svrwan:0
server:0 passthru:0
2008-10-14 00:07:11 *** WAAS Flow Agent (FA) manager module initialized ***
2008-10-14 00:07:11 Load SA Export config SA_EXPORT_ENABLED = 0
2008-10-14 00:07:11 *** Configure SuperAgent export: export disabled
2008-10-14 00:07:11 *** ART Metric Engine post initialization done. ***
2008-10-14 00:07:11 MAIN: dbgport_init: No cfg file!
2008-10-14 00:07:11 MAIN: Offtime LWP = 1382
2008-10-14 00:07:11 RPC: RPC LWP = 1383
2008-10-14 00:16:19 mond: exiting on signal 15.
2008-10-14 00:19:21 mond starting.
2008-10-14 00:19:21 MAIN: Timer LWP = 1570
2008-10-14 00:19:21 MAIN: Timekeeping LWP = 1571