Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 149
show cdp settings
To display the current Cisco Discovery Protocol (CDP) settings, use the show cdp settings
command.
show cdp settings
Note This command is not supported on NAM-1 or NAM-2 devices or the NAM
Virtual Blade.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Usage Guidelines
This command is supported only on NME-NAM-80S and NME-NAM-120S devices and Cisco NAM
2200 Series appliances.
Examples
To display the current CDP settings:
root@nam# show cdp settings
CDP is disabled
Message Interval: 60
Message Hold Time: 180
root@nam#
Related Commands
autocreate-data-source
cdp hold-time
cdp interval