Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 137
secure-clear all
To clean all users data before shipping, use the secure-clear all command. This is added in NAM
6.0(1).
Secure-clear all
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to clean all users data before shipping:
[e-mail]# secure-clear all
This operation will erase completely NAM user data.
(including removing the NAM IP connectivity parameters such
as IP address, To reconfigure the NAM network connectivity,
you must use the switch/router session CLI command or UART port.
Do you wish to continue? (y/n) [n]: