Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 135
rise-nam enable / disable
To enable or disable nam rise interface, use the rise-nam enable / disable command. This is added
in NAM 6.0(2) and currently only works on NAM 2300 appliances.
rise-nam enable | disable
Syntax Description
disable
disable RISE for NAM appliance.
enable
enable RISE for NAM appliance.
Defaults
default is disable for 6.0(2).
Command Modes
Command mode
Examples
These examples show how to enable and disable rise interface on NAM appliances:
[e-mail]# rise-nam enable
[e-mail]# rise-nam disable
Related Commands