Reference Guide
Cisco Prime Network Analysis Module Command Reference Guide Page 131
Examples
This example shows how to configure a remote storage for capturing iSCSI data:
root@hostname.cisco.com# remote-storage iscsi
format - format a iSCSI storage target
fsck - run FS check on an iSCSI storage target (may take several minutes)
label - label an iSCSI storage target
list - list all iSCSI storage targets
local-iqn - show local iSCSI Qualified Name
login - Login to an iSCSI session
logout - Logout from an iSCSI session
mount - re-mount an iSCSI storage target
unmount - unmount an iSCSI storage target (safely remove)
discover - discover targets at a given IP address
root@hostname.cisco.com#
This example shows the output of remote-storage iscsi local-iqn:
root@hostname.cisco.com# remote-storage iscsi local-iqn
Local iSCSI Qualified Name: iqn.1987-05.com.cisco:WS-SVC-NAM3-6G-K9.00:19:55:07:14:FA
The example shows the output of remote-storage iscsi list. It includes a list of iSCSI sessions at
the end.
root@hostname.cisco.com# remote-storage iscsi list
Storage ID: 7
Label:
Status: Ready
Protocol: ISCSI
Target IP: 172.20.98.182
Target IQN: iqn.1999-02.com.nexsan:p0:satabeast2:029c65ec
Type: LUN
Model: NEXSAN SATABeast2
LUN: 2
Capacity: 1.82TB
Available: 1.73TB
Active iSCSI Sessions:
tcp: [2] 172.20.98.182:3260,1 iqn.1999-02.com.nexsan:p0:satabeast2:029c65ec
root@hostname.cisco.com#
Related Commands
show remote-storage