Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 130
remote-storage iscsi
To list or format the iSCSI remote storage targets for capture data, use the remote-storage iscsi
command.
remote-storage iscsi
Syntax Description
name
Specifies the name for the iSCSI remote storage being
removed.
Syntax Description
Note This command is not supported on the NAM WAAS Virtual Blade.
Defaults
This command has no default settings.
Command Modes
Command mode
Usage Guidelines
When you enter the command, the following are available:
 format—Formats a iSCSI storage target.
 fsck—Runs FS check on an iSCSI storage target (may take several minutes).
 label —Labels an iSCSI storage target.
 list—Lists all iSCSI storage targets.
 local-iqn—Shows local iSCSI Qualified Name. Use the storage vendor's web interface to map
the NAM local ID to the storage LUNs.
 login—Logs into an iSCSI session.
 logout—Logs out from an iSCSI session.
 mount—Re-mounts an iSCSI storage target.
 unmount—Unmounts an iSCSI storage target (so it can be safely removed).
 discover—discover targets at a given IP address. This is added in NAM 6.0(1).