Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 13

This example opens a session to log into the NAM-1, -2, or -3, and NAM-NX1 consoles:

Step 1 Log into the console using the Telnet connection or the console port connection.

Step 2 Establish a console session with the NAM at the CLI prompt, using the session/attach command.

For example:

Cisco IOS Software:

switch> session slot 4 processor 1

The default escape character is Ctrl-^, then x.

You can also type 'exit' at the remote prompt to end the session

Trying 209.165.200.225 ... Open

Cisco Network Analysis Module (WS-SVC-NAM-3)

Catalyst Operating System Software:

switch> session 3

Trying NAM-3...

Connected to NAM-3.

Escape character is '^]'.

Cisco Network Analysis Module (WS-SVC-NAM-3)

Cisco Nexus Operating System (NX-OS) Software:

namlab-n7k-7# attach module 3 p 1

Attaching to module 3 proc-1...

telnet 127.1.4.25...

To exit type 'exit', to abort type 'Ctrl-^' or 'Ctrl+Shift+6'

Telnet escape character is '^^'.

Trying 127.1.4.25...

Connected to 127.1.4.25.

Escape character is '^^'.

Cisco Prime Network Analysis Module

n7k7-mod9.cisco.com login:

Step 3 Log into the NAM by typing root to log in as the root user or guest to log in as a guest user at the

Step 4 At the password prompt, enter the password for the account. The default password for the root

account is ―root,‖ and the default password for the guest account is ―guest.‖

Password:

After a successful login, the command-line prompt appears with information on the module and

Cisco Catalyst 6500 Series Network Analysis Module (WS-SVC-NAM-3-K9) Console, 5.0(1T.45)

nam.domain.com#