Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 121
preferences
To enter the preferences subcommand mode, and then configure how your screen displays
information, use the preferences command.
preferences
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Usage Guidelines
When you enter the preferences subcommand mode, the following commands are available:
 cancel—Discards changes and exits from the subcommand mode.
 csv-export all | current-screen— Sets the comma-separated values export monitor data options.
 data-displayed bits | bytes—Specifies how the data is displayed in bits or bytes.
entries-per-screen 1-100—(Optional) Sets the number of rows to display in tabular screens.
Default is 15. This is removed in NAM 6.0(1).
 exit—Saves changes and exits from the subcommand mode; see the exit command.
 format-large-number enable | disable—Displays the GUI counters in large numbers: K(kilo),
M(mega), or G(giga). This is removed in NAM 6.0(1).
 graph-bars 1-15— (Optional) Sets the number of bars on a displayed graph. Default is 10.
 help—Displays help; see the help command.
 number-notation commas-dot | dots-comma | spaces-comma—Sets the number notation to
commas or dot and so forth. For example: 1,000 or 1.000 or 300, 10.
 refresh-interval 60-3600—(Optional) Sets the screen refresh interval in seconds. Default is 60.
This is changed from 15 – 3600.
 resolve-hostname enable | disable—(Optional) Enables or disables hostname resolution.
Default is enable.
 Audit-trail enable | disable—Enables or disables audit trail. This is added in NAM 6.0(1).
 Capture-format enc—set enc as capture format. This is added in NAM 6.0(1).