Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 116
patch
To download and install a software patch, use the patch command.
patch ftp://user:passwd@host/full-path/filename
Syntax Description
ftp://user:passwd@host/full-path/file
name
Sets the path to download the patch.
Syntax Description
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to download and install a patch:
[e-mail]# patch ftp://hostname/fullpath/c6nam-3.6-strong-cryptoK9-patch-1-0.bin
Proceeding with installation. Please do not interrupt.
If installation is interrupted, please try again.
Downloading c6nam-3.6-strong-cryptoK9-patch-1-0.bin. Please wait...
ftp://hostname/fullpath/c6nam-3.6-strong-cryptoK9-patch-1-0.bin (1K)
- [########################] 1K | 1886.33K/s
1891 bytes transferred in 0.00 sec (1569.00k/sec)
Verifying c6nam-3.6-strong-cryptoK9-patch-1-0.bin. Please wait...
Patch c6nam-3.6-strong-cryptoK9-patch-1-0.bin verified.
Applying /usr/local/nam/patch/workdir/c6nam-3.6-strong-cryptoK9-patch-1-0.bin. Please wait...
########################################### [100%]
########################################### [100%]
Patch applied successfully.
[e-mail]#
Related Commands
show patches
show version