Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 113
nslookup
To configure name server queries, use the nslookup command.
nslookup hostname [server]
Syntax Description
hostname
Specifies the name server query host.
server
(Optional) Specifies the name server to query.
Syntax Description
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to configure name server queries:
[e-mail]# nslookup www.yahoo.com
Server: 127.0.0.1
Address: 127.0.0.1#53
Non-authoritative answer:
www.yahoo.com canonical name = www.yahoo.akadns.net.
Name: www.yahoo.akadns.net
Address:66.218.71.80
[e-mail]#