Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 109
monitor urlfilter
To enter the URL filter collection configuration subcommand mode, and then configure URL filters,
use the monitor urlfilter command. To remove the URL filters from the configuration, use the no
form of this command. This command is removed in NAM 6.0(1).
monitor urlfilter
no monitor urlfilter control-index
Syntax Description
control-index
Specifies the collection control index. Range is from 1
to 65535.
Syntax Description
Defaults
The control index is random.
Command Modes
Command mode
Usage Guidelines
When you enter the monitor URL filter subcommand mode, the following commands are available:
 ?—Displays help.
 cancel—Discards changes and exits from the subcommand mode.
 control-index control-index—Specifies the URL entry’s control index. Range is from 1 to
65535. Default is random.
 description string—(Optional) Specifies the URL filter’s description string.
 exit—Saves changes and exits from the subcommand mode; see the exit command.
 help—Displays help.
 host-regexp—Specifies the regular expression for the URL’s host.
 path-regexp—Specifies the regular expression of the URL’s path.
 protocol-encap—(Optional) Specifies the protocol encapsulation of the HTTP packet.