Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 107
monitor urlcollection
To enter the URL collection submode and configure URL collection, use the monitor urlcollection
command. To disable the URL collection, use the no form of this command.
monitor urlcollection
no monitor urlcollection
Syntax Description
This command has no keywords or arguments.
Defaults
This command has no default settings.
Command Modes
Command mode
Usage Guidelines
When you enter the URL collections submode, the following commands are available:
 ? or help—Displays help; see the help command.
 cancel—Discards changes and exits from the subcommand mode; see the
autocreate-data-source command section.
 data-source nam-data-source-name—Specifies the NAM data source name.
 exit—Saves changes and exits from the subcommand mode; see the exit command.
 ignore—(Optional) Sets the host, path, and the URL matching argument.
ignore host—Specifies that you ignore or do not ignore the URL’s host part when collecting
URL collection data.
ignore path—Specifies that you ignore or do not ignore the URL’s parth part when collecting
URL collection data.
ignore url-arg—Specifies that you ignore or do not ignore the URL’s arguments when
collecting URL collection data.
ignore enable | disable—Enables or disables this command.
 match-only string—(Optional) Specifies collecting only the URL data that matches the string in
the URL.
 max-entry 100 | 50 | 1000—(Optional) Specifies the maximum of URL collection entries.
 recycle enable | disable—Enables or disables aging of the URL collection data entries.